Notice

This site uses profiling cookies of third parties. If you want either to know more or to refuse consent to all or just some cookies, please click here.
By clicking on any element on the page you accept the use of cookies.

Produktnyheter

RGTS: THE NEW SOLID STATE SINGLE PHASE MOTOR SOFT STARTER

Robust and reliable soft starter for low starting torque single phase motors.

Lainate, October 2018 - Carlo Gavazzi Automation, the international electronics group with activities in the design, manufacture and marketing of electronic equipment, today presents its new single phase motor soft starter.

The RGTS is a very simple soft starter for low starting torque single phase AC induction motors. It only requires two easy settings for initial torque and ramp-up duration.

The RGTS is the perfect solution for fans and pumps running on 110 VAC up to 240 VAC, where the mains voltage is prone to sags. Particularly in a residential or in a light commercial environment, such voltage sags may cause disturbances to occupants as well as to sensitive electronic devices. In some cases, the high starting current may also cause protection devices to trip. The RGTS can considerably reduce the direct on line start current by 40%, thereby reducing such disturbances and ensuring better up-time.

Its robust design is also proven through the 100 kA short circuit current rating, making it compliant with the requirements of UL508a for industrial control panels. The fully solid state design makes this product ideal for application with frequent starts.

“We have seen an increasing trend for single phase soft starters. Our customers are asking for easy to configure products,” says Jason Demicoli – International Product Manager. “With this launch Carlo Gavazzi’s intention is to offer a wider soft starter products range for single phase motor applications, enabling us to further expand our sales in North America and in the Asiatic regions.”

Developed by our Competence Centre in Malta, the RGTS has been specifically designed for single phase motor in Water treatment, Agriculture, Building automation market applications such as pumps, fans and compressors.

Main technical features
• Simple interface with just 2 settings (resulting in reduced installation complexity)
• Fully solid state design (robust design for high frequency starts)
• 12 A up to 25 A in 54 mm wide housing
• Multi-voltage operation: 100 VAC up to 240 VAC
• Wide supply voltage range: 24 VAC/DC or 100 – 240 VAC versions
• 100 kA short circuit current rating

ABOUT CARLO GAVAZZI AUTOMATION
Carlo Gavazzi Automation is an international electronics group with activities in the design, manufacture and marketing of electronic equipment targeted at the global markets of industrial and building automation. Carlo Gavazzi Automation provides customers with technologically innovative, high quality and competitive solutions, in compliance with their requirements and expectations through its 22 National Sales Companies in Europe, the Americas and Asia & Pacific, operating with its production sites in Denmark, Italy, Malta, Lithuania and China.

For further information:
Carlo Gavazzi Automation SpA - Via Milano 13 – 20020 Lainate (MI) - Italy Marketing & Communication - info@gavazziautomation.com - www.gavazziautomation.com

SD2DUG24: THE NEW DUPLINE® GENERATOR AND MODBUS GATEWAY

The cost-effective plug & play solution for interfacing Dupline® I/O modules to control systems.

Lainate, September 2018 - Carlo Gavazzi Automation, the international electronics group with activities in the design, manufacture and marketing of electronic equipment, today launches the new Dupline® generator and Modbus gateway SD2DUG24.

This new device mainly performs three functions: Dupline® channel generator, power supply synchronization (enables 3-wire system with supply) and Modbus RS485 interface and it is fully programmable via software, which is free, downloadable from the Carlo Gavazzi website.

High modularity and scalability, as well as fast and easy installation, allow this module to be progressively integrated even into an existing system.

This module replaces and upgrades the G34900000xxx and G34960005xxx modules, and it can be integrated into the Sx2WEB24 or the new UWP 3.0 platform, enhancing its communication capability and making it ready for the IIoT and Industry 4.0.

“Following the launch of the Profinet gateway, this new Dupline® generator and Modbus gateway is a further project intended to update the Dupline® industrial range”, Raffaella Sirena, International Product Manager, states. “We are confident that the release of this module will give us the opportunity to grow our business in Modbus based infrastructures typically using PLC.”

Developed by our Competence Centre in Belluno, the SD2DUG24 module, part of the Dupline® bus system, has been designed for applications in Industrial Automation, Water Distribution, Energy Management and Mining.

Main technical features
• Modbus-RTU slave interface
• Built-in 2 and 3-wire Dupline® channel generator
• Generation of 8, 16, 24, 32, 40, 48, 56, 64, 96 and 128 channels
• All the Dupline® protocols are supported
• LED-indications for supply, Dupline® carrier and RS485
• Formulas to scale the raw data read from the field
• Easy connection to the PC via a USB port

ABOUT CARLO GAVAZZI AUTOMATION
Carlo Gavazzi Automation is an international electronics group with activities in the design, manufacture and marketing of electronic equipment targeted at the global markets of industrial and building automation. Carlo Gavazzi Automation provides customers with technologically innovative, high quality and competitive solutions, in compliance with their requirements and expectations through its 22 National Sales Companies in Europe, the Americas and Asia & Pacific, operating with its production sites in Denmark, Italy, Malta, Lithuania and China.

For further information:
Carlo Gavazzi Automation SpA - Via Milano 13 – 20020 Lainate (MI) - Italy Marketing & Communication - info@gavazziautomation.com - www.gavazziautomation.com

Messer

Pack Expo 14 Oct-17 Oct 2018 Chicago, IL-USA
Home & Building 17 Oct-18 Oct 2018 Verona-Italy
Elmässan 17 Oct-18 Oct 2018 Stockholm-Sweden

Kommende messer

Energia 2018 23 Oct-25 Oct 2018 Tampere-Finland
Euro Expo 24 Oct-25 Oct 2018 Tromsø-Norway
Elisør 31 Oct-01 Nov 2018 Kristiansand-Norway
IBS 06 Nov-07 Nov 2018 Paris-France
European Utility Week 06 Nov-08 Nov 2018 Wien-Austria
CIPHEX West 07 Nov-08 Nov 2018 Calgary, AB-Canada
Concapan 07 Nov-09 Nov 2018 San Salvador-El Salvador
Euro Expo 07 Nov-08 Nov 2018 Örnsköldsvik-Sweden
Smart Buildings Show 07 Nov-08 Nov 2018 London-UK
Matelec 13 Nov-16 Nov 2018 Madrid-Spain
Elmia Subcontractor 13 Nov-16 Nov 2018 Jönköping-Sweden
ATX 14 Nov-15 Nov 2018 Montreal, QC-Canada
ELECTRICX 17 Nov-19 Nov 2018 Cairo-Egypt
EMEX 21 Nov-22 Nov 2018 London-UK
Forogen 22 Nov-22 Nov 2018 Madrid-Spain
Sps / Ipc / Drives 27 Nov-29 Nov 2018 Nuremberg-Germany
Data Centre World 27 Nov-28 Nov 2018 Paris-France